THESE UNITS ARE NO LONGER AVAILABLE!!!!!
(December 15, 2016)
For those that have had issues locating the long obsolete Modicon/Cutler-Hammer/Eaton PanelMate, five-button, side mounted, touch keypad…….Delta now has them in stock! The cost is $450.00 each.
These units are exact replacements. You simply unbolt the old defective keypad, unplug the connector, then peel off the old membrane keypad from the aluminum back-plate. Clean any adhesive residue off if any is remaining on the plate. Peel the paper backing off of the new membrane and adhere it to the plate. Reinstall it into the PanelMate, tighten the nuts back down, plug-in the connector and it’s ready for use. This keypad is listed under several part numbers depending upon the brand that it was labeled under.
These parts numbers are: 63-00387-01 91-00796-01 PP-16240-004
do you have keypads for 39PKHX PM 3000?
I will need to check on those.
Please contact me via my email at bobculley@deltaautomation.com
Thanks,
bob
Unfortunately, these pieces are also not available new.
Thanks,
Bob